RS 485 IS Repeater Monitoring Kit

SKU
101-200QBXR
$3,060.00
RS 485 IS Repeater Monitoring Kit containing:
  • 1 x Head station 1B (101-20011B)
  • 1 x 1 Channel RS 485 IS SCOPE Repeater (101-201410C)
  • 1 x 1 Channel repeater (101-201101)

RS 485 IS Repeater Monitoring Kit containing:


Head station 1B:

Worldwide access to an COMBricks

Head station type 1B has monitoring capabilites for 1 network. The Head Station is the primary element of ComBricks and schedules the interaction between all modules and provides data storage and an Ethernet interface for the user.

Type 1B contains a ProfiTrace core for monitoring 1 PROFIBUS network and an advanced web server for permanent remote maintenance of the PROFIBUS installation over Ethernet (hardware is identical as a type 1A).
For monitoring repeater modules or slave modules are required to provide PROFIBUS telegrams on the backplane network.

Through the ProfiTrace 2 software package, OPC tags can be directly streamed from the Head Station type 1B. ProfiTrace 2 will run with full monitoring functionality and the user can benefit from its features.

The Head Station provides power to all modules through its redundant power supply.

Basic features:

  • Redundant power supply
  • Operating voltage: 11 - 26 VDC
  • Drives 32 modules (10 high-speed)
  • Repeating function on 1 network
  • Redundancy function on 1 network
  • Protocal: HTTP, FTP, SMTP, NELNET, SNMP, CommDTM.

Special features:

  • Live data streaming & OPC tags.
  • ProfiTrace OE monitoring on 1 network (Live list / Statistics / SCOPE / Bar graph)

 


1 Channel RS 485 IS SCOPE Repeater:

RS 485 IS The COMbricks RS 485 Intrinsic Safety barrier is capable of creating segments for use in potentially explosive atmospheres. It complies with the specifications for PROFIBUS DP in IS segments and drives 31 RS 485-IS PROFIBUS DP devices. ProfiTrace and an Oscilloscope are integrated and also suitable for Intrinsic Safety.

Features include:

  • Intrinsically safe RS 485
  • Integrated quality-oscilloscope
  • Diagnostic LEDs
  • Max busspeed 1.5 Mbps
  • 31 devices per channel
  • RS 485 IS DB9 connection
  • Redundancy feature included
  • With RS 485 is connector (502-00207)

Delivered including backplane socket and RS 485 IS connector.

The RS 485-IS barrier is the only available product for remotely monitoring IS segments over Ethernet from the safe zone. Because of the permanent mounting of the barrier, the user does not have to touch the installation anymore. This avoids hot permits and other paper work.

As an alternative it can also be used as a busmonitor on existing IS segments created by 3rd party barriers.

The IS barrier can be mixed on the backplane with other COMbricks modules like, the PROFIBUS PA, Fiber Optic and regular RS 485 modules.

 


1 Channel Repeater:

1 Channel standard RS 485 PROFIBUS repeater module for 12 Mbps with diagnostic LEDs and redundancy feature. Bus connection is utilized by screw terminals and additional DB9 connector.

The repeater channels are directly connected with the ProfiTrace OE core in the 1B/1C Head Station. Busmonitor data is directly available in the web server.

The advanced 12 Mbps core of the repeater module can be cascaded unlimitedly and has increased RS 485 strength. The data traffic is constantly monitored for glitches which are digitally filtered out. It has on-board switchable termination and able to drive 31 devices.

Features include:

  • Diagnostics LEDs
  • Busspeed up to 12 Mbps
  • 31 devices per channel
  • Screw terminals bus connection
  • DB9 connector for monitoring
  • Redundancy feature included
  • Bus termination integrated 

Delivered including backplane socket.

 

Head Station 1B:

Key features:

  • Drives 32 modules (10 high-speed)
  • Redundant power supply
  • uSD card holder for 32 GB (SD and SDHC)
  • USB connector for firmware updates

 

Ethernet:

  • 10 / 100 Mbps link speed
  • Protocols: HTTP, FTP, SMTP, TELNET, SNMP, CommDTM

 

Web server with ProfiTrace OE:

  • Status of all modules
  • Live List
  • Statistics
  • Message recording
  • Email and log on PROFIBUS events
  • System log

 

Power supply:

  • Operating voltage: 11 - 26 VDC
  • Backplane current: 2.5 A

 

Other features:

  • Operating temperature: 0 - 60 °C
  • Dimensions: 140 x 110 x 25 mm
  • Weight: 150 g

 


1 Channel RS 485 IS SCOPE Repeater

RS 485 ISElectrical and Mechanical:

  • 1 Bus channel
  • 31 devices/bus-loads per channel
  • 1200 m cable length (depends on baudrate)
  • 1 DB9 connector

 

Protocol:

  • Transparent for all PROFIBUS protocols
  • 9.6 kbps - 1.5 Mbps (auto detection)
  • 2 bits delay time (12 bits in redundant mode)
  • No address required
  • Bus redundancy (selectable)

 

ATEX (electrical):

  • Uo = 4.2 V
  • Io = 149 mA
  • Ui ≥ 4.2 V
  • Li ≈ 0 μH
  • Ci = Negligibly small
  • Output characteristic: Linear

 

ATEX (compliance):

  • II (2) G [Ex ia Gb] IIC
  • EN-IEC60079-0: 2009
  • EN-IEC60079-11: 2012
  • EN-IEC60079-25: 2010
  • Certification number: DEKRA 12ATEX0192
  • Compliant with the PNO RS 485-IS Installation Guidelines V1.1

 

Oscilloscope:

  • Frequency: 192 MS/s
  • Resolution: 27 mV
  • Differential range: -3.49 - +3.49 V

 

Backplane:

  • 4 Networks selectable with switches
  • 10 Modules (positioned in the first 10 slots)
  • 450 mA current consumption

 

Other features:

  • Operating temperature: 0 - 60 °C
  • Dimensions: 120 x 103 x 25 mm
  • Weight: 150 g

 


1 Channel Repeater:

Electrical and Mechanical:

  • 1 Bus channels
  • 31 devices/bus-loads per channel
  • 1200 m cable length (depends on baudrate)
  • No limit in cascading
  • Termination switches for each channel
  • Removable screw terminals and 1 DB9 connector

Protocol:

  • Transparent for all PROFIBUS protocols
  • 9.6 kbps - 12 Mbps (auto detection)
  • 2 bits delay time (12 bits in redundant mode)
  • No address required
  • Bus redundancy (selectable)

Backplane:

  • 4 Networks selectable with switches
  • 10 Modules (positioned in the first 10 slots)
  • 300 mA current consumption

Other features:

  • LEDs (Error, Rx data, Termination ON)
  • Operating temperature: 0..60 °C
  • Dimensions: 140 x 110 x 25 mm
  • Weight: 150 g